Please use this identifier to cite or link to this item: http://repositorio.uisek.edu.ec/handle/123456789/5050
Title: Análisis de vulnerabilidad sísmica en el barrio la Floresta del Distrito Metropolitano De Quito
Authors: Otáñez Gómez, Hugo Marcelo
Chalco Caiza, Maryuri Virginia
Keywords: VULNERABILIDAD
PUSHOVER
DERIVAS
DESEMPEÑO
CARGAS
Issue Date: Jul-2022
Publisher: Universidad Internacional SEK
Citation: GT - IC C436an/2022
Abstract: El presente trabajo investigativo realizará un estudio sobre la vulnerabilidad sísmica, en el barrio La Floresta de Quito misma que pertenece a la provincia de Pichincha, la presencia de edificaciones informales, donde no cuentan con estudio de suelo, planos estructurales y arquitectónicos, han sido factores para implementar un estudio al barrio con el objetivo de evitar riesgos humanos y económicos ante la presencia de un sismo. Se aplicará la norma (NEC-2015), norma ASTM-308, FEMA 154 y la Guía Práctica de diseño para estructuras en hormigón armado, en el cual se determinará el grado de vulnerabilidad mediante investigaciones exploratorias y de campo. Se procede a levantar información al barrio, donde se analizará la vulnerabilidad a una edificación que cuenta con dos pisos, construido en hormigón armado, mediante la prueba del esclerómetro o martillo Schmidt mismo que determinará la resistencia del hormigón. Se procederá a la modelación con el software ETABS, donde se realizará el estudio de análisis estático lineal como no lineal (Pushover), cálculo del espectro de diseño elástico y cortante basal mismo que determinarán el desempeño de dicha estructura.
Description: The present investigative work will carry out a study on the seismic vulnerability, in the La Floresta neighborhood of Quito, which belongs to the province of Pichincha, the presence of informal buildings, where they do not have a soil study, structural and architectural plans, have been factors to implement a study of the neighborhood with the aim of avoiding human and economic risks in the presence of an earthquake. The standard (NEC-2015), standard ASTM-308, FEMA 154 and the Practical Design Guide for reinforced concrete structures will be applied, in which the degree of vulnerability will be determined through exploratory and field investigations. Information is collected from the neighborhood, where the vulnerability of a building that has two floors, built in reinforced concrete, will be analyzed through the sclerometer or Schmidt hammer test, which will determine the resistance of the concrete. The modeling will be carried out with the ETABS software, where the study of linear and non-linear static analysis (Pushover), calculation of the elastic design spectrum and basal shear will be carried out, which will determine the performance of said structure.
URI: http://repositorio.uisek.edu.ec/handle/123456789/5050
Appears in Collections:Ingeniería Civil

Files in This Item:
File Description SizeFormat 
Tesis- Maryuri Chalco.pdf6.79 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.