Please use this identifier to cite or link to this item: http://repositorio.uisek.edu.ec/handle/123456789/939
Title: Diseño e instalación de un módulo de pruebas de inyección electrónica en el vehículo CHEVROLET SPARK modelo 2005
Authors: Yánez, Yamandú
Romero Freire, Xavier Alejandro
Keywords: MECÁNICA AUTOMOTRIZ
VEHÍCULOS
SISTEMAS DE INYECCIÓN ELECTRÓNICA
MOTOR
Issue Date: 4-Dec-2013
Publisher: Universidad Internacional SEK
Citation: CT- MAU R664d/2013
Abstract: Este proyecto de fin de carrera surge con la finalidad de fortalecer el estudio de los sistemas de inyección electrónica, para lo cual es necesario crear una herramienta, que sirva como material de apoyo en el estudio de la materia de Inyección Electrónica. Consiste en un módulo de pruebas para el vehículo Chevrolet Spark modelo 2005, con el propósito de unir tanto la instrucción teórica como la práctica, lo que apoyará al desarrollo de habilidades y destrezas en los estudiantes con un alto nivel de conocimiento y de esta manera puedan responder a las exigencias del mundo laboral de una manera más rápida y eficaz. Este módulo de inyección electrónica será diseñado con el fin de simular situaciones reales de operación del vehículo, siendo estas: funcionamiento normal y con fallas. El módulo se realizo mediante un circuito básico controlado por switchs que corta la señal de un sensor o actuador del vehículo, permitiendo de esta manera simular la falla del elemento que se va a estudiar y con el mismo switch se cierra el circuito para que vuelva a su funcionamiento normal. En las pruebas se puede realizar es la adquisición de datos de los diferentes sensores y actuadores, como la variación de voltaje, temperatura, resistencia en condiciones normales y falla. Los instrumentos de medida que se necesitan para el uso del módulo son el multímetro para la adquisición de valores y el scanner para el diagnóstico y verificación de datos.
Description: This final year project was created with the aim of strengthening the study of electronic injection systems, for which it is necessary to create a tool that will serve as support material in the study of the subject of Electronic Injection. It consists of a test module for the 2005 Chevrolet Spark vehicle, with the purpose of uniting both the theoretical and practical instruction, which will support the development of skills and abilities in students with a high level of knowledge and in this way they can respond to the demands of the working world in a faster and more efficient way. This module of electronic injection will be designed with the purpose of simulating real situations of operation of the vehicle, being these: normal operation and with failures. The module was made through a basic circuit controlled by switches that cuts the signal of a sensor or actuator of the vehicle, thus allowing to simulate the failure of the element to be studied and with the same switch the circuit is closed so that it returns to its normal operation. In the tests can be performed is the acquisition of data from different sensors and actuators, such as variation of voltage, temperature, resistance in normal conditions and failure. The measuring instruments that are needed for the use of the module are the multimeter for the acquisition of values ​​and the scanner for the diagnosis and verification of data.
URI: https://repositorio.uisek.edu.ec/handle/123456789/939
Appears in Collections:Mecánica Automotriz

Files in This Item:
File Description SizeFormat 
Romero Freire, Xavier Alejandro1.8 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.