Please use this identifier to cite or link to this item: http://repositorio.uisek.edu.ec/handle/123456789/4429
Title: Evaluación de riesgos en el traslado del equipo de perforación entre plataformas en la fase de exploración avanzada
Authors: Llerena Carrera., Gerardo Marcelo
Calvachi Valverde, Verónica Paulina
Keywords: IPERC
PELIGRO
RIESGO
RIESGO RESIDUAL
MEDIDAS DE CONTROL
Issue Date: 27-Sep-2021
Publisher: Universidad Internacional SEK
Citation: CT- ESSM C167ev/2021
Abstract: El presente proyecto de investigación tiene como objetivo identificar los peligros y evaluar los riesgos que pueden suceder durante las actividades que se realizan en el traslado del equipo de perforación entre plataformas en la fase de exploración avanzada, cabe indicar que está actividad es considerada como una actividad secundaria dentro del proceso de perforación; sin embargo, al dejarla relegada pueden ocasionar altos riegos a los trabajadores. La metodología utilizada para la identificación de peligros y evaluación de riesgos es la matriz IPERC, debido a que permite realizar un análisis minucioso de los riesgos y establecer medidas de control adecuadas a fin de minimizar el riesgo inicial evaluado, en este caso las medidas de control más utilizadas son de ingeniería, administrativas y de equipo de protección personal. Dentro del análisis de los riesgos iniciales se identificó 13 peligros y evaluaron 24 riesgos que corresponden a 4 de bajo riesgo, 17 de mediano riesgo y 3 de alto riesgo, sin embargo, mediante la aplicación de medidas de control los riesgos disminuyeron significativamente hasta llegar a bajo riesgo. Finalmente, se evaluó el riesgo residual con el propósito de dar un seguimiento y mejora continua a los controles implementados para reducir el riesgo inicial, cabe indicar que es importante realizar una actualización anual del análisis de riegos y contar con la participación activa de los trabajadores.
Description: The purpose of this research project is to identify the eventual liabilities and evaluate the risks that may occur during the activities performed in the transfer of drilling equipment between platforms in the advanced exploration phase, it should be noted that this activity is considered as a secondary activity within the drilling process, however, leaving it relegated can cause high risks to workers. The methodology used for this identification and risk assessment is the IPERC matrix, because it allows a thorough analysis of the risks and establish appropriate control measures to minimize the initial risk assessed, in this case the most commonly used control measures are engineering, administrative and personal protective equipment. Within the analysis of the initial risks, thirteen potential liabilities were identified and twenty-four risks were evaluated, corresponding to four low risk, seventeen medium risk and three high risk; however, through the application of control measures, the risks decreased significantly to low risk. Finally, the residual risk was evaluated in order to monitor and continuously improve the controls implemented to reduce the initial risk. It is important to update the risk analysis annually and to have the active participation of the workers.
URI: https://repositorio.uisek.edu.ec/handle/123456789/4429
Appears in Collections:Especialización en Seguridad Minera

Files in This Item:
File Description SizeFormat 
Trabajo final VERÓNICA CALVACHI.pdf1.99 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.