Please use this identifier to cite or link to this item: http://repositorio.uisek.edu.ec/handle/123456789/3924
Title: Selección de materiales mediante uso de multicriterio aplicado a un engranaje helicoidal de la caja de cambios de dmax 3.0
Other Titles: Selection of materials through the use multi-criteria applied to a Dmax 3.0 helical gearbox
Seleção de materiais através da utilização de multi-ritos aplicados a uma engrenagem de caixa de velocidades helicoidas Dmax 3.0
Authors: Martínez-Gómez, Javier
Vaca, Chrystopher
Leguísamo-Milla, Julio César
Keywords: METODOLOGÍA DE MULTICRITERIO (MCDM)
SELECCIÓN DE MATERIAL
FACTORES DE PONDERACIÓN
CLASIFICACIÓN
DEPENDENCIA DE CRITERIOS
ENGRANAJE HELICOIDAL
Issue Date: 24-Jan-2020
Publisher: CienciAmérica
Citation: PUB M386se/2020
Abstract: Select the best option of material using the Multi-criterion methodology (MCDM), obtaining the best results and the respective choice of material, achieving a safety factor that protects against faults by bending fatigue and is within the permitted parameters applied to a gearbox of the Dmax 3,0. For which multicriteria decision-making methods were carried out to obtain an order or ranking of the set of alternatives. To obtain this ranking, the set of alternatives must be well defined, just as the criteria must be well determined. After using the multi-criteria, it was determined that the best material option according to the ranking is the AISI 4140, which has relevant characteristics such as elastic limit, tensile strength and good thermal capacity. The methodology used for the weights helps to avoid the designer's subjectivity and make it conform to real parameters. Based on the numerical results, it can be concluded that the proposed methods can deal with the problems of material selection with the dependence of criteria.
Description: Seleccionar la mejor opción de material utilizando la metodología de Multicriterio (MCDM), obteniéndose los mejores resultados y la respectiva elección del material, consiguiendo un factor de seguridad que proteja contra fallas por fatiga de flexión y esté dentro de los parámetros permitidos aplicado a un engranaje de caja de cambios de la Dmax 3,0. Para lo cual se realizaron los métodos de toma de decisión multicriterio para obtener un orden o ranking del conjunto de alternativas. Para obtener este ranking, el conjunto de alternativas debe estar bien definido al igual que los criterios deben estar bien determinados. Luego de utilizar los multicriterio se determinó que la mejor opción de material según el ranking es el AISI 4140 que presenta características relevantes como el límite elástico, resistencia a la tracción y buena capacidad térmica. La metodología empleada para los pesos ayuda a evitar la subjetividad del diseñador y hacer que se ajuste a parámetros reales. En la base de los resultados numéricos, se puede concluir que los métodos propuestos pueden lidiar con los problemas de selección de materiales con la dependencia de criterios.
URI: https://repositorio.uisek.edu.ec/handle/123456789/3924
ISSN: 1390-9592
1390-681X
Appears in Collections:Publicaciones UISEK

Files in This Item:
File Description SizeFormat 
13909592 MARTINEZ JAVIER 2020-01-07.pdf747.75 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.