Please use this identifier to cite or link to this item: http://repositorio.uisek.edu.ec/handle/123456789/3850
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorMoreno Jiménez, Gustavo Adolfo-
dc.contributor.authorArmijos Calva, Carlos Andrés-
dc.date.accessioned2020-08-05T16:10:46Z-
dc.date.available2020-08-05T16:10:46Z-
dc.date.issued2020-08-
dc.identifier.citationCT-MAU A729s/2020es
dc.identifier.urihttps://repositorio.uisek.edu.ec/handle/123456789/3850-
dc.descriptionEl presente proyecto tiene como objetivo el desarrollo de un sistema de movimiento de un panel solar fotovoltaico hacia la zona de mayor incidencia solar. A su vez, realizar la adquisición de datos de voltaje y corriente almacenarlos en una hoja de cálculo en Google para un posterior análisis y tratamiento. Para la realización de este sistema, es necesario la utilización de componentes electrónicos y microcontroladores (un módulo Arduino, un módulo Wifi). Para la automatización del panel solar se utiliza los sensores de luz conformados por fotorresistencias y los actuadores que serán dos motores que permitirán el giro de la estructura, en la adquisición de datos es necesario la utilización de un sensor de voltaje y otro de corriente, estos datos que serán obtenidos se procesarán en la placa Arduino, luego se enviará mediante comunicación serial al módulo Wifi para por último subir estos datos a la red de internet. Los resultados obtenidos son impresos en el puerto serial donde se puede observar las diferentes condiciones de funcionamiento del panel solar fotovoltaico y la ejecución de las tareas de movimiento (se realizarán cada 5 min), adquisición de datos de voltaje y corriente (se realizarán cada 15 min). Estos tiempos de ejecución se podrán cambiar realizando modificaciones en la cuarta línea del código de Arduino mega nombrada como intervalos. Por último, también se presentan las conclusiones y recomendaciones a las que se ha llegado en base al desarrollo del trabajo de titulación.es
dc.description.abstractThe objective of this project is to develop a system for moving a photovoltaic solar panel to the area with the highest solar incidence. In turn, perform the acquisition of voltage and current data store them in a spreadsheet in Google for further analysis and treatment. To carry out this system, it is necessary to use electronic components and microcontrollers (an Arduino module, a Wifi module). For the automation of the solar panel, light sensors made made up of photoresistors and actuators are used, which Will be two motors that will allow the structure to rotate, in acquiring data, it is necessary to use a voltage and current sensor, these data that will be obtained will be processed on the Arduino board, then it will be sent via serial communication to the Wifi module to finally upload this data to the internet network. The results obtained are printed on the serial port where you can see the different operating conditions of the photovoltaic solar panel and the execution of movement tasks (they will be carried out every 5 min), acquisition of voltage and current data (they will be carried out every 15 min). These execution times can be changed by making modifications to the fourth line of the mega Arduino code named as intervals. Finally, the conclusions and recommendations that have been reached based on the development of the degree work are also presented.es
dc.description.sponsorshipUisekes
dc.language.isospaes
dc.publisherUniversidad Internacional SEKes
dc.rightsopenAccesses
dc.subjectMECÁNICA AUTOMOTRIZes
dc.subjectMONITOREO DE ENERGÍAes
dc.subjectPANEL SOLARes
dc.subjectENERGÍA FOTOVOLTAICAes
dc.titleSistema de seguimiento solar y monitoreo de energíaes
dc.typeinfo:eu-repo/semantics/bachelorThesises
Appears in Collections:Mecánica Automotriz

Files in This Item:
File Description SizeFormat 
Armijos Calva, Carlos Andrés4.47 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.