Please use this identifier to cite or link to this item: http://repositorio.uisek.edu.ec/handle/123456789/1291
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorSalazar Alvear, Paolo Alejandro-
dc.contributor.authorJácome Mancheno, Fernando Mauricio-
dc.date.accessioned2015-08-20T13:23:23Z-
dc.date.available2015-08-20T13:23:23Z-
dc.date.issued2015-07-
dc.identifier.citationCT-MDM M312an/2015es
dc.identifier.urihttps://repositorio.uisek.edu.ec/handle/123456789/1291-
dc.descriptionThe result of this titration work was the verification that steel V320 - 4140 does not need to perform a heat treatment of sub quenching or hardening at high hardness because it becomes very fragile and loses its properties of bonded steel. The process of tempering below zero is recommended in tool-grade steels, ie steels with which parts that have a high degree of wear are manufactured, because this process allows to modify the structure of the steel and increase its life time in large measure. Likewise, it was possible to demonstrate that the treatment of tenifer or nitriding only gives the material a superficial layer that avoids corrosion, but does not provide an improvement in the mechanical properties of the material. The steel V320 - AISI4140 is used mainly in the manufacture of mechanical parts for the oil industry, due to its high carbon content and its reduced state at the time of its manufacture.-
dc.description.abstractEl resultado de este trabajo de titulación fue la comprobación de que en el acero V320 – 4140 no se necesita realizar un tratamiento térmico de temple subcero o temple a alta dureza debido a que el mismo se vuelve muy frágil y pierde sus propiedades de acero bonificado. El proceso de temple bajo cero es recomendado en aceros de grado herramienta, es decir aceros con los que se fabrican piezas que tengan alto grado de desgaste, debido a que este proceso permite modificar la estructura del acero y elevar su tiempo de vida útil en gran medida. De igual manera se pudo evidenciar que el tratamiento de tenifer o nitruración únicamente brinda al material una capa superficial que evita la corrosión, más no brinda una mejoría en las propiedades mecánicas del material. El acero V320 - AISI4140 es utilizado sobretodo en la fabricación de piezas mecánicas para la rama petrolera, debido a su alto contenido de carbono y su estado bonificado al momento de su fabricación.es
dc.language.isospaes
dc.publisherUniversidad Internacional SEKes
dc.subjectDISEÑO MECÁNICOes
dc.subjectACEROes
dc.subjectTRATAMIENTO TÉRMICOes
dc.titleAnálisis de la microestructura del acero V320 sometido a tracción y torsión luego de un tratamiento térmico de temple subceroes
dc.typeThesises
Appears in Collections:Mecánica en Diseño y Materiales

Files in This Item:
File Description SizeFormat 
Jácome Mancheno, Fernando Mauricio2.91 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.