DSpace Collection:http://repositorio.uisek.edu.ec/handle/123456789/40062024-03-13T11:59:46Z2024-03-13T11:59:46ZControl domótico de torre de cultivo hidropónico para interioresVillarreal Enriquez, Jefferson Edgarhttp://repositorio.uisek.edu.ec/handle/123456789/52002024-03-01T20:22:47Z2024-02-01T00:00:00ZTitle: Control domótico de torre de cultivo hidropónico para interiores
Authors: Villarreal Enriquez, Jefferson Edgar
Abstract: El siguiente artículo detalla el desarrollo de un sistema de cultivo hidropónico interior controlado mediante tecnología domótica. El objetivo principal fue diseñar un prototipo que mejore el cultivo de alimentos en espacios limitados, utilizando un sistema automatizado para regular factores clave como pH y temperatura. Se seleccionaron plantas adecuadas: en este caso lechuga, fresa y albahaca, para interiores, y se creó un diseño que promueva su crecimiento óptimo. La metodología empleada fue la Metodología en V, que incluyó definición de requisitos, diseño, implementación, integración, verificación y validación del sistema. Los resultados demostraron la viabilidad del prototipo, manteniendo condiciones adecuadas para el cultivo hidropónico y presentándose como una solución práctica para la agricultura interior.
Description: The following article details the development of an indoor hydroponic growing system controlled by home automation technology. The main objective was to design a prototype that improves the cultivation of food in limited spaces, using an automated system to regulate key factors such as pH and temperature. Suitable plants were selected: in this case lettuce, strawberry and basil, for indoor use, and a design was created that promotes their optimal growth. The methodology used was the V Methodology, which included definition of requirements, design, implementation, integration, verification and validation of the system. The results demonstrated the viability of the prototype, maintaining adequate conditions for hydroponic cultivation and presenting itself as a practical solution for indoor agriculture.2024-02-01T00:00:00ZCaracterización térmica de la mezcla del aceite de la semilla de maracuyá y del aceite de limoncillo para aplicación como material de cambio de faseAraujo Zambrano, Ricardo Javierhttp://repositorio.uisek.edu.ec/handle/123456789/50962023-09-25T16:28:06Z2023-09-01T00:00:00ZTitle: Caracterización térmica de la mezcla del aceite de la semilla de maracuyá y del aceite de limoncillo para aplicación como material de cambio de fase
Authors: Araujo Zambrano, Ricardo Javier
Abstract: En el presente trabajo se realizó la caracterización térmica de la mezcla del aceite de semilla
de maracuyá y de limoncillo. La extracción de los aceites de semilla de maracuyá se efectuó
por el método de Bligh - Dyer y la extracción del aceite de limoncillo por arrastre de vapor.
Obteniendo la materia prima para la extracción del aceite de semilla de maracuyá a partir de
desechos orgánicos de la industria alimenticia, específicamente de los desechos de la
producción de vino de maracuyá. Las hojas de limoncillo fueron obtenidas de agricultores de
la provincia de Tungurahua, buscando aprovechar tanto los desechos orgánicos como
producción agrícola. Luego obtener los aceites se realizaron las mezclas para ser analizadas
por espectrometría infrarroja, calorimetría diferencial de barrido y termogravimetría que
permiten identificar grupos funcionales, capacidad calorífica, puntos de fusión y estabilidad
térmica de las mezclas de aceites estudiadas. Los resultados mostraron que el aceite de semilla
de maracuyá presenta una capacidad calorífica de 53.54 J/g a temperatura de – 20 °C pudiendo
aplicarse como material de cambio de fase a bajas temperaturas, mientras que el aceite de
limoncillo no presenta cambio de fase al rango de temperatura estudiado. La investigación
busca ser aporte para el estudio de desechos y material orgánico de la zona buscando
aprovechar residuos y materia prima local para nuevos usos.
Description: This study is about the thermal characterization of the mix of passion fruit and lemongrass
seed oil. The extraction of the passion fruit seed oils was carried out by the Bligh-Dyer
method, and the extraction of the lemongrass oil by steam distillation. The raw material for
the extraction of passion fruit seed oil was obtained from organic waste from the food industry,
specifically waste from the production of passion fruit wine. The lemongrass leaves were
obtained from farmers in the Tungurahua province, seeking to take advantage of both organic
waste and agricultural production. After obtaining the oils, the mixtures are made to be
analyzed by infrared spectrometry, differential scanning calorimetry, and thermogravimetry
that allow the identification of functional groups, heat capacity, melting points, and thermal
stability of the studied oil mixtures. The results showed that passion fruit seed oil has a heat
capacity of 53.54 J/g at a temperature of -20 °C and can be applied as a phase change material
at low temperatures, while lemongrass oil does not present a phase change at the temperatures
studied. The research seeks to contribute to the study of waste and organic material in the area
seeking to take advantage of waste and local raw material for new uses.2023-09-01T00:00:00ZGestión del proceso de recepción y monitoreo de la hoja de trabajo en un taller mecánico automotriz mediante IOTGavilanes Oleas, José Andréshttp://repositorio.uisek.edu.ec/handle/123456789/50452023-08-10T13:24:53Z2023-08-01T00:00:00ZTitle: Gestión del proceso de recepción y monitoreo de la hoja de trabajo en un taller mecánico automotriz mediante IOT
Authors: Gavilanes Oleas, José Andrés
Abstract: La presente investigación se enfoca en el diseño de un sistema automático de control y
monitoreo de la hoja de recepción y hoja de trabajo pensado para talleres automotrices
especializados en brindar un servicio de mantenimiento de vehículos livianos. El proyecto
busca presentar una nueva propuesta al proceso de recepción de vehículos en talleres
mediante la aplicación de IoT, de tal forma que pueda agilizar y automatizar la atención al
cliente brindando un servicio de respuesta rápida mediante un chatBot de Telegram
gestionado por NodeRED desde una base de datos que el taller o el operario va rellenando
por medio de GoogleSheet y AppSheet, y de esta manera tener todos los datos
sincronizados entre el taller automotriz y del cliente. Este prototipo fue diseñado para ser de
fácil uso tanto desde un celular o una computadora con la aplicación de Telegram, los datos
de ingreso del vehículo y los datos del trabajo realizado lo puede realizar un operario del
taller mediante un celular con la aplicación de AppSheet la cual está sincronizada con una
hoja de cálculo de Google, de esta forma la información ingresada es automáticamente
guardada en una base de datos para poder ser utilizada en la facturación, hoja de recepción
y hoja de trabajo además de que el cliente puede solicitar esa información mediante el
número de placa del vehículo por medio de Telegram.
Description: This degree project is based on the design of an automatic control and monitoring system of
the reception sheet and work sheet for automotive workshops specialized in providing a
maintenance service for light vehicles. The project seeks to present a new proposal to the
process of receiving vehicles in workshops through the application of IoT, so that it can
streamline and automate customer service by providing a quick response service to the
customer through a Telegram chatBot managed by NodeRED from a database that the
workshop or the operator is filling through GoogleSheet and AppSheet, and thus have all
the data synchronized between the automotive workshop and the customer. This prototype
was designed to be easy to use from a cell phone or a computer with the Telegram
application, the data entry of the vehicle and the data of the work done can be done by a
workshop operator using a cell phone with the AppSheet application which is synchronized
with a Google spreadsheet, in this way the information entered is automatically saved in a
database to be used in billing, reception sheet and worksheet in addition to the customer can
request that information through the license plate number of the vehicle via Telegram2023-08-01T00:00:00ZDiseño y construcción de un prototipo de invernadero para agricultura de precisión a través de IOTGuzmán Vaca, Andrés Eduardohttp://repositorio.uisek.edu.ec/handle/123456789/49972023-04-18T16:29:16Z2023-03-01T00:00:00ZTitle: Diseño y construcción de un prototipo de invernadero para agricultura de precisión a través de IOT
Authors: Guzmán Vaca, Andrés Eduardo
Abstract: Este proyecto de titulación tiene planteado como principal objetivo el diseño y construcción de un
prototipo de invernadero con un sistema de monitoreo permanente mediante IOT para dar
seguimiento a las condiciones ambientales y variables para un sistema de nebulización, enfocado
en desarrollar una aplicación de agricultura de precisión.
Para la construcción de este prototipo se desarrolló una estructura modular en base a tubería PVC
para la cámara del invernadero, de fácil transporte e instalación.
El sistema de monitoreo consta de dos tipos de sensores: Ambientales, de temperatura, humedad
e iluminación y; Sumergibles, de temperatura, conductividad eléctrica y pH los cuales dan
seguimiento a la solución nutritiva a usarse en los cultivos. También, cuenta con un sistema de
suministro de agua, la cual es inyectada al interior del invernadero a través de una bomba.
Todas las variables son monitoreadas y trasmitidas a una aplicación en la nube cuyo servidor se
encuentra alojado en Arduino IOT Cloud donde el usuario puede acceder a toda la información en
tiempo real, controlar el suministro de líquido nutriente, activar manualmente la iluminación,
desahogar el exceso de humedad a través de un sistema de ventiladores y adicionalmente descargar
un registro histórico de las variables físicas medidas para su futuro análisis.
Los registros históricos de las variables pueden ser utilizados en futuras aplicaciones agrícolas en
este tipo de invernaderos para dar trazabilidad de las condiciones con las cuales se obtuvieron los
cultivos
Description: This degree project was developed to design and build a greenhouse prototype with a permanent
monitoring system through IOT to monitor the environmental conditions and variables of the
irrigation system for a precision agriculture application.
A modular structure was design and developed for the construction of this greenhouse prototype
using a PVC pipe which is easy to transport and install.
The monitoring system consists of two types of sensors. Environmental sensors for temperature,
humidity and lighting and submersible sensors for temperature, electrical conductivity and pH to
monitor the nutrient solution to be used in crops. Also, it has a water supply system, which is
supplied to the interior of the greenhouse through a pump.
All the variables are monitored and transmitted to a cloud application whose server is hosted on
Arduino IOT Cloud where the user have access to the sensors information in real time, control the
supply of nutrient liquid, manually activate the lighting, vent excess humidity through a fan and
also download a historical record of the variables sensed for future analysis.
The historical records of the variables collected by the monitoring system can be used in future
greenhouse agricultural applications. This records provide traceability of the conditions with
which the crops will be obtained.2023-03-01T00:00:00Z