Please use this identifier to cite or link to this item: http://repositorio.uisek.edu.ec/handle/123456789/3882
Title: Métodos multicriterio aplicados a la parte lateral de una estructura autoportante para vehículos livianos
Other Titles: Multi-criteria methods applied to the side of a self-supporting structure for light vehicles
Métodos multicritérios aplicados à parte lateral de uma estrutura autoportante para veículos ligeiros
Authors: Martínez-Gómez, Javier
Rocha-Hoyos, Juan Carlos
Llanes-Cedeño, Edilberto Antonio
Salazar Loor, Rodger
Keywords: ESTRUCTURA LATERAL
MÉTODO DE PONDERACIÓN
MÉTODO MULTICRITERIO
MCDM
Issue Date: 2-Jul-2019
Publisher: CienciAmérica
Citation: PUB M386m/2019
Abstract: INTRODUCTION. The selection of materials is an important stage in the design and development of products, through the use of multi-criteria methods, it is possible to establish a reliable selection methodology, converging in a unique and reliable solution. OBJETIVE. To apply multi-criteria methods for the selection of the structural side part of a vehicle, to obtain greater efficiency and performance in the use of materials. METHOD. Using the Pareto methodology and multi-criteria methods (TOPSIS, COPRAS, VIKOR, PROMETHEE II), establish reliable performance indicators for the selection of structural materials based on the comparison of quantitative criteria. RESULTS. After the comparison of the applied methods, it is observed that all establish that the material of Martensitic Steel YS1200 is the most suitable. DISCUSSION AND CONCLUSIONS. The material determined has great potential in the manufacture of vehicle structures, is relatively inexpensive and light, and with the right technology it is possible to implement it.
Description: INTRODUCCIÓN. La selección de materiales es una etapa importante en el diseño y desarrollo de productos, mediante la utilización de métodos multicriterio, es posible establecer una metodología de selección confiable, convergiendo en una solución única y fiable. OBJETIVO. Aplicar métodos multicriterio para la selección de la parte lateral estructural de un vehículo, para obtener una mayor eficiencia y rendimiento en el aprovechamiento de materiales. MÉTODOS. Mediante la metodología de Pareto y métodos multicriterio (TOPSIS, COPRAS, VIKOR, PROMETHEE II), establecer indicadores de resultados confiables para la selección de materiales estructurales en base a la comparación de criterios cuantitativos. RESULTADOS. Luego de la comparación de los métodos aplicados, se observa que todos establecen que el material del Acero Martensítico YS1200 es el más adecuado. DISCUSIÓN Y CONCLUSIONES. El material determinado tiene gran potencial en la fabricación de estructuras del vehículo, es relativamente económico y ligero, y con la tecnología adecuada es posible su implementación.
URI: https://repositorio.uisek.edu.ec/handle/123456789/3882
ISSN: 1390-9592
Appears in Collections:Publicaciones UISEK

Files in This Item:
File Description SizeFormat 
13909592 MARTINEZ JAVIER 2019-07-02.pdf835.8 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.