Please use this identifier to cite or link to this item: http://repositorio.uisek.edu.ec/handle/123456789/3369
Title: Diseño de un escáner 3D de bajo costo para la toma de medidas antropométricas
Authors: Dávila Rodríguez, Pablo Ramiro
Bassantes Ortiz, Joe Horfayt
Keywords: SEGURIDAD Y SALUD OCUPACIONAL
SCANNER 3D
ANTROPOMETRÍA
BAJO COSTO
ECUADOR
Issue Date: May-2019
Publisher: Universidad Internacional SEK
Citation: CT-SSO B317d/2019
Abstract: Los diseños de los puestos de trabajo, equipos, maquinaria, herramientas y espacios en general se deben realizar considerando la antropometría de los usuarios, lamentable en los países en vías de desarrollo, como el Ecuador, no se cuenta con la antropometría de sus habitantes, por tanto, se utilizan tablas antropométricas que no se ajustan a su realidad, lo que ocasiona problemas de productividad, desperdicio de recursos, e incluso afectaciones en la seguridad y salud de la población en general. Un grupo de investigadores consientes de la necesidad de contar con el modelo antropométrico de la población, y de las dificultades que se presentan al realizar la toma de medidas antropométricas mediante la toma de medidas directas en las personas (tiempo de las personas a ser medidas y el contacto físico directo puede llegar a ser molestoso para algunas personas), con el avance tecnológico estos problemas se solucionan, pero los escáneres 3D son de alto costo y más aún si son de alta precisión. Se desarrolló una aplicación de escáner donde se combinan hardware y software. En el hardware se utiliza: un ordenador de condiciones medias (core I5 o suoerior), se incluye una tarjeta gráfica (costo promedio de 600 USD), un sensor KINECT 360 (sensor del juego XBOX 360), y una plataforma giratoria horizontal de 360 grados. En el software se emplea el software SKANECT (Scanning Software By Occipital) y el software libre BLENDER (Blender Foundation). Con el escáner estructurado con esas características el costo total es de aproximadamente 1800 USD, si tomamos en cuenta que el computador tentativamente las empresas o los investigadores ya poseen, el costo del escáner pasa aproximadamente a 600 u 800 USD. En la evaluación de la precisión obtenida en el escáner para el levantamiento de las medidas del cuerpo humano, podemos indicar que al contrastar los valores obtenidos mediante el método tradicional y las medidas obtenidas con el proceso digital la diferencia llega a un valor inferior al 2%, lo cual permite se cumplan los estándares requeridos para el cálculo del modelo antropométrico de una población. Además, hemos evaluado el tiempo que emplea la persona en una toma de medidas antropométricas por el método tradicional manual que es entre 15 a 20 minutos, si la persona que hace la medición es experta de lo contrario está actividad tomaría más tiempo; utilizando el scanner el tiempo empleado es de 5 a 6 minutos.
Description: The designs of jobs, equipment, machinery, tools and spaces in general should be made considering the anthropometry of users, unfortunate in developing countries, such as Ecuador, do not have the anthropometry of its inhabitants, therefore, anthropometric tables are used that do not conform to their reality, which causes problems of productivity, waste of resources, and even effects on the safety and health of the population in general. A group of researchers aware of the need to have the anthropometric model of the population, and the difficulties that arise when taking anthropometric measurements by taking direct measures in people (time of the people to be measured and direct physical contact can be annoying for some people), with the technological advance these problems are solved, but 3D scanners are expensive and even more so if they are of high precision. A scanner application was developed where hardware and software are combined. The hardware is used: a computer with medium conditions (core I5 or higher), a graphic card is included (average cost of 600 USD), a KINECT 360 sensor (XBOX 360 game sensor), and a 360 horizontal rotating platform degrees. The software uses SKANECT software (Scanning Software by Occipital) and BLENDER free software (Blender Foundation). With the structured scanner with these features the total cost is approximately 1800 USD, if we take into account that the computer tentatively companies or researchers already have, the cost of the scanner is approximately 600 or 800 USD. In the evaluation of the accuracy obtained in the scanner for the measurement of the human body, we can indicate when contrasting the values obtained by the traditional method and the measurements obtained with the digital process, the difference reaches a value lower than 2%, which allows the required standards to be met for the calculation of the anthropometric model of a population. In addition, we have evaluated the time the person uses in taking anthropometric measurements by the traditional manual method that is between 15 to 20 minutes, if the person making the measurement is expert otherwise this activity would take more time; using the scanner the time taken is 5 to 6 minutes.
URI: https://repositorio.uisek.edu.ec/handle/123456789/3369
Appears in Collections:Seguridad y Salud Ocupacional

Files in This Item:
File Description SizeFormat 
Bassantes Ortiz, Joe Horfayt755.21 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.